客戶提供的關于閥門安裝的說明，求大蝦幫忙翻譯解釋一下，謝謝

charles006

客戶提供的關于閥門安裝的說明，求大蝦幫忙翻譯解釋一下，謝謝
9 @+ {3 k8 O, I" f" TInstallation
4 l- O5 |( |2 v3 O# sDon`t use flange sealings. The seat ring of the Butterfly valves has a sealing lip which operates as flange
gasket between valve and flange during mounting.
• Insert the valve with the disc in the nearly closed position between the flanges. lf the flanges are located too
closely in an existing pipe, they must be so spreaded by means of a special device that the valve can be
. \3 R/ C1 l9 Q/ Peasily installed with clearance .
• Mount the flange boIts and centre and align the valve between the flanges. Hand-screw the flange bolts.
6 v" r" z% m4 S4 ASpot weld the flanges to the pipe .
! _2 N% h2 S& ~% \1 R# j8 _2 [9 @• Before cross-tightening the flange bolts uniformly, it must be ensured by the test actuation that the valve
! a" W- Z! n1 `* P8 h! ydisc can move freely within the connecting flanges .
Attention! In case of improper insertion of the disc between the flanges, the seat ring may be displaced and
destroyed during the first operations. Similarly, the sealing strip of the valve disc can be damaged if it is not
observed that the disc can move freely between the flanges.

左旋貝殼

安裝
; f( D+ H+ Z9 Z  }
請勿使用法蘭密封件。蝶閥閥座密封面上有一圈密封唇可以充當閥與法蘭之間的墊片。（刀口法蘭？還是組合墊？）
* ^" A9 U4 b" @- s4 N
/ U  F3 o: z, ^* F# ~7 B將閥門關閉后，將裝好閥板的閥門插入到法蘭之間。如果法蘭離現有的管路太近，應通過一種特殊設備將管路撐開，以便騰出安裝間隙。

/ _- K) `6 d$ s- ~" i' ^8 Q- M裝上法蘭螺栓，對準閥門和法蘭的中心。
+ o! A5 E$ p6 d& w" ?7 S' a4 l擰緊法蘭螺栓。
現場將法蘭焊接到管路中。
  B, u' s% l- G
在交叉擰緊法蘭螺栓之前，必須測試閥板在運動時與所連接的法蘭不會發生干涉。

" e+ |/ H, s6 X5 D注意！一旦安裝閥板錯誤（與法蘭干涉），閥座密封圈會在第一次運動時位移并損壞。同樣的，如果沒有注意閥板是否能在法蘭間自由運動，閥板的密封圈會被損壞。

學著

翻譯的不錯！( ^_^ )